Reference: Rotothinner™ DV2700
Rotothinner viscometer
The Rotothinner viscometer allows continuous viscosity monitoring during addition of solvents and diluents as well as viscosity analysis at pre-defined times.
Brookfield PFT Powder Flow Tester Rheometer | Labomat
Brookfield PFT Powder Flow Tester Rheometer
Rhéomètre Brookfield PFT
The Powder Flow Tester (PFT) rheometer for powder is used to control powders and similar products (flour, powdered milk, cement, raw materials, pharmaceuticals ...) on receipt, to perform a rapid characterization of their flow and '' assess their discharge due to storage.
Description
The Powder Flow Tester (PFT) analyzer is used to control powders and similar products (flour, powdered milk, cement, raw materials, pharmaceuticals ...) on receipt, to perform a rapid characterization of their flow and assess their discharge due to storage.
• Control exclusively via Powder Flow Pro software.
• 4 types of tests:
Flow curve.
Consolidation time after flow.
Friction test.
Apparent density.
• 3 types of flow tests:
Demo (8 min).
Standard (38 min).
Consolidation time (time defined by the operator).
• Possibility of doing the following tests:
Intrinsic flow curves.
Flow curves against the walls.
Apparent density.
Consolidation time.
Results expressed as desired:
Flow curves.
Cohesive force.
Arch diameter.
Mouse hole diameter.
Internal friction angle (Half Hopper).
Friction angle against the walls.
Apparent density...
- Meets ASTM D6128.
- Supplied with Powder Flow Pro software, USB cable, standard volume or low volume accessory kit, standard stainless steel friction test kit, powder scoop, cleaning brush and NIST-connected calibration certificate.
- Optional: other friction test kits (22-28RA mild steel, Tivar 88 or other), temperature probe, humidity probe, low volume or standard volume sieving kit, carrying case and demonstration kits.
| PFT |
|
| Load for the compression of the vertical axis | 7 kg ± 0.6% full scale |
| Axial speeds | 0.1 to 5 mm / s |
| Distance | ± 0.3 mm |
| Couple | ± 7 Nm ± 1.2% full scale |
| Rotation speed | 1 to 5 revolutions / h |
| Optional DVP-94Y temperature probe | -20 ° C to 120 ° C |
| Optional PFT-607Y humidity probe | 10 to 95 %HR ± 5%HR |
Powder Flow Pro software (included)
The Powder Flow Pro software makes it possible to control the PFT and easily interpret the results obtained.
- Pre-programmed tests, customization possible.
- Presentation of the results in the form of independent tabs corresponding to each type of analysis (flow curves, density, etc.).
- Automatic calculations after each test and presentation in the form of tables or graphs (overlay up to 8 curves).
Demonstration video:
Product Details
Rhéomètre Brookfield PFT
16 other products in the same category:
Brookfield gel consistency tester
The Brookfield gel consistency tester consists of a DV2T viscometer and a glass rod system connected to the viscometer by magnetic coupling.
ULA / ULA-DIN adapters for low viscosities
Adaptable to all Brookfield viscometers, the ULA (Ultra Low Adapter) kit allows precise and repeatable measurement of Newtonian and non-Newtonian products of low viscosities (up to 1 cP). A coaxial cylindrical mobile rotates inside a chamber containing the sample and having a removable cap allowing direct use in a beaker. When in place, the then closed...
TC-150 / -250 / -550 / -650 baths
Brookfield offers a wide range of thermostatic and refrigerated baths that can accommodate both one or several beakers and regulate a double jacket (SSA, ULA, ULA-DIN, Wells cone / plane viscometers and rheometers RST-CC and RST-CPS) via an external circulation.
Software for Brookfield viscometers, rheometers and texturometers
Download the software for your Brookfield viscometers, rheometers and texturometers here.
Quick Connect Adapter
Allows the rapid assembly / disassembly of standard mobiles on all Brookfield viscometers with conventional geometry and the Helipath system by sliding the fixing ring holding the 2 connections.
Reference: Coupes de viscosité
Viscosity cups
Simple method for determining the kinematic viscosity of paints, oils, resins, emulsions, inks and other products by measuring the flow time of the fluid through a calibrated orifice.
SSA adapter for low volumes
Adaptable to all Brookfield viscometers with classic geometry, the SSA (Small Sample Adapter) kit consists of a coaxial cylindrical mobile of your choice, a measuring chamber and a thermo-regulated double jacket by thermostatic bath.
Reference: Rhéomètre Brookfield Dvnext
Brookfield DVNext rheometer
Brookfield DVNext Rheometer / The all-in-one tool for measuring viscosity and yield strength in compliance with 21 CFR Part 11 and GAMP.
Rheo3000 software (option)
The Rheo3000 software is used to control the RST and RS Plus rheometers and to control the stress or the shear rate. The use of multi-step programs makes the qualification of any product possible: average viscosity, yield point, thixotropy, etc.
Reference: Rhéomètre Brookfield RSX
RSX rheometers
RSX touch screen rheometers can work in velocity, velocity gradient or imposed stress, thus allowing the rheological characterization of viscous or visco-elastic products. Available in several measurement geometries: cone/plane (RSX-CPS Cone/Plan model), plane/plane (RSX-CPS Plan/Plan model), coaxial cylinders (RSX-CC model) or with vane spindles (RSX...
IVisc capillary viscometer
The iVisc capillary viscometer allows the measurement of the kinematic viscosity of your products Capillary viscometer according to DIN 51562, ASTM D445 Fully automatic measurement and analysis Simple “Plug & Play” installation
Reference: Brookfield Viscometer DV2Plus
Brookfield Viscometer DV2Plus
The world standard in viscosity control The DV2Plus viscometer is the successor to Brookfield's most popular DV2T viscometer. It features a modern 7-inch touchscreen, expanded speed control with 740 speeds, and optional Bluetooth connectivity.
HPQA, Helipath Quick Action Stand
The new Helipath HPQA Ametek Brookfield support is an innovative, motorized, quick-action stand allowing: Advanced Helipath testing Quick adjustment of the viscometer position
Thermosel system for high temperature measurements
System equipped with an oven intended for viscosity measurements up to 300 ° C by coaxial geometry.
The Powder Flow Tester (PFT) rheometer for powder is used to control powders and similar products (flour, powdered milk, cement, raw materials, pharmaceuticals ...) on receipt, to perform a rapid characterization of their flow and '' assess their discharge due to storage.