Reference: Rotothinner™ DV2700

Rotothinner viscometer

The Rotothinner viscometer allows continuous viscosity monitoring during addition of solvents and diluents as well as viscosity analysis at pre-defined times.

Software for Brookfield viscometers, rheometers and texturometers

Download the software for your Brookfield viscometers, rheometers and texturometers here.

Reference: Supports pour coupes sans manche

Holders for sleeveless cups

VF2061, VF2067, VF2068

Reference: Jauges de finesse de broyage

Grinding fineness gauges

Gauges used to determine the fineness of grinding (particle size) of many products such as paints, lacquers, pigments, etc.

Rheo3000 software (option)

The Rheo3000 software is used to control the RST and RS Plus rheometers and to control the stress or the shear rate. The use of multi-step programs makes the qualification of any product possible: average viscosity, yield point, thixotropy, etc.

IVisc capillary viscometer

The iVisc capillary viscometer allows the measurement of the kinematic viscosity of your products Capillary viscometer according to DIN 51562, ASTM D445 Fully automatic measurement and analysis Simple “Plug & Play” installation

Reference: Rhéomètre Brookfield RSX

RSX rheometers

RSX touch screen rheometers can work in velocity, velocity gradient or imposed stress, thus allowing the rheological characterization of viscous or visco-elastic products. Available in several measurement geometries: cone/plane (RSX-CPS Cone/Plan model), plane/plane (RSX-CPS Plan/Plan model), coaxial cylinders (RSX-CC model) or with vane spindles (RSX...

Standard silicone and mineral oils

Standard oils with Newtonian behavior certified NIST used for the control of viscometers.

Reference: Viscosimètre ICI Brookfield CAP

Brookfield CAP2000+ Cone-Plate Viscometers

The Brookfield CAP 2000+ viscometers are ICI type viscometers with cone-plate geometry and imposed speed allowing rapid measurement, at controlled temperature, on small sample volumes. This is a characterization at high shear rate on products such as paints, varnishes, inks, resins and petroleum products.

VF2053 conversion disc

Used to determine the viscosity in cSt according to the flow time obtained for the following cuts:

Reference: Rhéomètre Brookfield Dvnext

Brookfield DVNext rheometer

Brookfield DVNext Rheometer / The all-in-one tool for measuring viscosity and yield strength in compliance with 21 CFR Part 11 and GAMP.

TexturePro CT software

TexturePro CT software makes it easy to control the texturometer and thus perform multiple tests.

ULA / ULA-DIN adapters for low viscosities

Adaptable to all Brookfield viscometers, the ULA (Ultra Low Adapter) kit allows precise and repeatable measurement of Newtonian and non-Newtonian products of low viscosities (up to 1 cP). A coaxial cylindrical mobile rotates inside a chamber containing the sample and having a removable cap allowing direct use in a beaker. When in place, the then closed...

Reference: LOOP

Lauda Loop L 100 and L 250 baths

Temperature regulators.

Reference: Rhéomètre Brookfield DVNext CP

Rhéomètre cône plan modèle Brookfield DVNext CP

Thermosel system for high temperature measurements

System equipped with an oven intended for viscosity measurements up to 300 ° C by coaxial geometry.