
Leneta Application Cards
Standardized test cards for determining the physical aspects and properties (covering power, opacity, penetration, gloss ...) of paints, varnishes, inks, emulsions, cosmetics, etc.
The Hand K Lox is a simple and economical steel cylinder applicator, mechanically engraved and chromed (anilox). It allows rapid flexographic proofs or varnish applications.
The Hand K Lox is a simple and economical steel cylinder applicator, mechanically engraved and chromed (anilox). It allows rapid flexographic proofs or varnish applications.
• Starter kit (ref. KLOX 01S): includes 1 frame, 2 weights, 1 standard engraved steel cylinder and 1 standard rubber cylinder (EPDM, 50 Shore).
• Complete kit (ref. KLOX 02S): includes 1 frame, 2 weights, 3 standard engraved steel cylinders, 2 standard rubber cylinders (EPDM, 50 Shore) and a storage / cleaning rack.
• The application width is 115 mm.
Cylinders engraved in standard steel (lignature / cylinder number) | Engraving | Cell volume cm³ / m² | |
nb cells / cm | nb cells / inch | ||
400/5 | 160 | 400 | 4.3 |
200/12 | 80 | 200 | 10.2 |
180/14 | 70 | 180 | 16.6 |
140/10 | 55 | 140 | 20.2 |
100/18 | 40 | 100 | 39.1 |
Non-standard engraved steel cylinders on request.
Etchings (specified by the number of cells / cm and by the volume of the cell, ref. KLOX20) and thicknesses (specified in wet film microns, ref. KLOX 21).
Demonstration video:
Standardized test cards for determining the physical aspects and properties (covering power, opacity, penetration, gloss ...) of paints, varnishes, inks, emulsions, cosmetics, etc.
The K Control Coater or KCC provides fast, highly accurate and reproducible samples of liquid products. Ideal when repeatability is essential, for example for basic color creation or when a number of operators are involved. The coatings are applied by spiral bars.
These flexo proofing machines dedicated to all those involved in the manufacture and use of flexo inks are ideal for quality control, production of proofs under machine conditions, R&D and basic realization colorimetric.
Special applicator in stainless steel with 4 openings with double reservoir, each with 4 different values, allowing simultaneous application of 2 layers of coating with the same thickness.
The spread and sag applicator is a special film applicator with dual function: one side with 10 openings from 75 to 300 microns to test the tendency to sag (due to gravity depending on film thickness), the other side with 5 pairs of notches of increasing depth made to create sets of two strips of film (the fusion of the strips can be assessed to define...
Standardized test cards for determining the physical aspects and properties (covering power, opacity, penetration, gloss ...) of paints, varnishes, inks, emulsions, cosmetics, etc.
The K Lox Automatic Proofer provides reproducible speed and pressure for high-precision flexo proofing. This machine is recommended when repeatability is essential, for example for basic color creation or when a number of operators are involved.
Internationally recognized, Q-Panel test panels offer a reproducible and uniform test surface to assess the visual (color, gloss, orange peel) and physical (abrasion, adhesion, impact, bending, thickness, hardness, etc.) properties, but also to carry out tests for corrosion, aging, chemical resistance, curing, drying, etc.
The VCML is designed to print, deposit and laminate all types of flexible media (paper, plastic films, metallized films, etc.) on a reel-to-reel basis. Its many application processes make it an ideal pilot machine for product development, quality control and small-scale low-volume production.
The Sag Index Applicator is especially designed for sag resistance evaluation. The total film width of 90mm is equally divided into 10 gaps, incremented in depths of 25µm
The K Paint Applicator KPA is widely used for applying paints, varnishes, etc., to produce accurate and reproducible samples.
Very high quality proofing using rotogravure inks. Proofs are produced instantly using the GP100. Ideal for R&D, colorimetric databases, quality control and making presentation samples.
These automatic film applicators provide films of uniform thickness and appearance by applying the product under test at constant speed and pressure.
The 4-Sided Film Applicator (Quadruplex) has four application sides for applying paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is supplied with a guidance support for straight application. This support may be removed as well. The high grade stainless steel will not be affected by acid or...
Cylindrical film applicators with 4 application sides to apply paint films of 4 different predefined thicknesses.
The Hand K Lox is a simple and economical steel cylinder applicator, mechanically engraved and chromed (anilox). It allows rapid flexographic proofs or varnish applications.