
Leneta Application Cards
Standardized test cards for determining the physical aspects and properties (covering power, opacity, penetration, gloss ...) of paints, varnishes, inks, emulsions, cosmetics, etc.
2 openings of your choice from 10 to 650 microns.
For drying time tests, the 25 mm cubic applicator with 38 and 76 micron apertures is commonly used.
Standardized test cards for determining the physical aspects and properties (covering power, opacity, penetration, gloss ...) of paints, varnishes, inks, emulsions, cosmetics, etc.
Internationally recognized, Q-Panel test panels offer a reproducible and uniform test surface to assess the visual (color, gloss, orange peel) and physical (abrasion, adhesion, impact, bending, thickness, hardness, etc.) properties, but also to carry out tests for corrosion, aging, chemical resistance, curing, drying, etc.
The K Hand Coater or KHC is a simple and efficient way to apply liquid products like paint, ink, glue, etc. on many supports such as paper, cardboard, plastic films, sheets, metal or glass plates, wood ... Two or more coatings can be applied side to side in a single operation, making the system ideal for comparing products.
Multifunctional film applicator with 8 application sides, with 8 predefined different thicknesses.
The spread and sag applicator is a special film applicator with dual function: one side with 10 openings from 75 to 300 microns to test the tendency to sag (due to gravity depending on film thickness), the other side with 5 pairs of notches of increasing depth made to create sets of two strips of film (the fusion of the strips can be assessed to define...
Prism-shaped film applicators with 4 application sides, i.e. 4 different predefined thicknesses. They are suitable for the application of many products on flat and relatively rigid substrates. They are made of high quality stainless steel and are not altered by acidic or alkaline products.
The 4-Sided Film Applicator (Quadruplex) has four application sides for applying paint films with four different predefined thicknesses, in film width 60 or 80 mm. One side of the applicator is supplied with a guidance support for straight application. This support may be removed as well. The high grade stainless steel will not be affected by acid or...
The Sag Index Applicator is especially designed for sag resistance evaluation. The total film width of 90mm is equally divided into 10 gaps, incremented in depths of 25µm
Special applicator in stainless steel with 4 openings with double reservoir, each with 4 different values, allowing simultaneous application of 2 layers of coating with the same thickness.
Angular film applicators with 1 flat edge, i.e. 1 predefined thickness. They are suitable for the application of many products on flat and relatively rigid substrates. They are made of high quality stainless steel and are not altered by acidic or alkaline products.
Cylindrical film applicators with 4 application sides to apply paint films of 4 different predefined thicknesses.
Cubic stainless steel applicators 25 mm useful width.