Reference: Rhéomètre Brookfield Dvnext

Brookfield DVNext rheometer

Brookfield DVNext Rheometer / The all-in-one tool for measuring viscosity and yield strength in compliance with 21 CFR Part 11 and GAMP.

Reference: UC1

UC1 Q-Lab Universal Calibrator

UC1 Q-Lab Universal Calibrator

Reference: DC9000

DC9000 boat hull roughness gauge

Controlling the roughness of a boat's hull plays an important economic and ecological role. Composed of a control unit with neck strap as well as a sensor equipped with 3 non-slip wheels and a carbide stylus, the device is moved horizontally on the surface of the vessel and collects a series of measurements.

Reference: SP0050

SP0050 identification labels

Imperfections or problems observed during coating inspections need to be clearly identified. A simple photo of the label makes it possible to identify the defect thanks to the comments area and its dimensions.

Reference: KH300

Kesternich corrosion chambers KH300 - KH300TT

Kesternich corrosion chambers KH300 - KH300TT Complies with standards : ASTM D2247, ISO 11503, NFT 30-077, NFT 30-055, ASTM G87, BS3900 / F9, ISO 6270-2 CH, EN ISO 6988, SFW 2,0, S, ISO EN 1096 B, DIN 50017 KK and KTW, ISO 3231, DIN 50018, VDA 621-421, ISO EN 1096 C

HD3000L analog hardness testers

Durometers equipped with narrow probes for measuring small surfaces and hard to reach places.Hardness measurement according to Shore A or Shore D scales

Climate chambers with variable conditions Binder

These enclosures have been developed to meet industry requirements and extreme climatic test conditions. They are ideal for cyclic testing.

Ascott S- iP Corrosion Chambers

Wide range of enclosures allowing continuous salt spray testing or cycle testing.

Weld inspection kits

Weld inspection kits

Software for DAKOTA ULTRASONICS thickness gauges

Download the software for your DAKOTA ULTRASONICS thickness gauges here

Reference: Paste Ink Proofer

Paste Ink Proofer PIP Applicator

Sample press for fast and reproducible color preparation of litho, offset and letterpress inks (high viscosity viscous inks). This machine is unique in its use, an automatic ink dosing system eliminates the need to weigh or measure ink samples. Interchangeable engraved cylinders are used to produce prints of different densities.

AB3500 Dry Time Recorder for TQC Automatic Film Applicators

An optional drying time recording tool is available to convert the Model AB4120, AB4220 and AB4320 Automatic Film Applicators to drying time recorders.

Software for Brookfield viscometers, rheometers and texturometers

Download the software for your Brookfield viscometers, rheometers and texturometers here.

Reference: Novo-Gloss 60 degrés

Novo-Gloss 60 degrees glossmeter

The Novo-Gloss 60 degree glossmeter is suitable for measuring gloss in most applications, from matt to high gloss finishes. This high specification portable glossmeter is suitable for use in many environments, including laboratories and production areas, and is the ideal choice for general gloss measurements of a variety of substrates and industrial...

Reference: Applicateurs Quadruplex

4-Sided film applicators quadruplex

The 4-Sided Film Applicator (Quadruplex) has four application sides for applying paint films with four different predefined thicknesses, in film  width 60 or 80 mm. One side of the applicator is supplied with a guidance support for straight application. This support may be removed as well. The high grade stainless steel will not be affected by acid or...

Reference: Novo-Gloss Flex

Novo-Gloss Flex 60 glossmeter with separate micro-probe

Designed specifically to measure the gloss of surfaces that cannot be measured with traditional glossmeters, the Novo-Gloss Flex 60 glossmeter has a micro-probe allowing gloss measurements at the universal 60 ° angle.