Persoz and / or König automatic hardness pendulums

Used to assess the hardness of a coating by measuring the duration of the damping of a pendulum oscillating on its surface. Persoz and / or König hardness measurement

Crock

Crockmeter kit (166 g) Ref. 130570 including an adapter with fixing clip and a set of Crock 50 fabrics×50 mm Ref. 130811. Felt squares 50×50 mm Ref. 134948 also available. Crock Test System Load: 417.7 ± 1g (without additional weight).

Strap Abraser Taber 5820

Model dedicated to the abrasion resistance evaluation of seat belts, straps, harnesses, etc. nylon, polyester, leather, polymers and other soft materials.

Abrasive tip supports

4 models of abrasive tip supports are available: - Wearaser holder in stainless steel (98 g) Ref. 130852 (supplied as standard) - Aluminum Wearaser holder (28 g) Ref. 131852 - Wearaser plastic holder (16 g) Ref. 131852-1 - Wearaser Jumbo holder (43 g) Ref. 131862 (for Wearaser Jumbo Ø ½ ”abrasive tips).

AB6000 Wet Abrasimeter

Used to conduct dry or wet abrasion and washability tests on flat specimens to determine the resistance of paints, varnishes and coatings to dry or wet rubbing wear. Also suitable for testing the resistance of plastics (melamine worktops, household appliances, etc.) by simulating the daily action of brushes, sponges and abrasive pads, as well as the...

820 sand fall apparatus

Apparatus used to measure the resistance of paints, varnishes and other organic coatings to abrasion created by the fall of standardized natural silica sand or grains of silicon carbide through a guide tube.

Scratch Tester Taber 551

Determine the minimum load necessary for the appearance of a regular scratch on a rotating specimen.

Shore D standard blocks (set of 5)

These 5 standard blocks (10, 20, 40, 65 and 90 type D) can be used as comparison blocks or as a reference check for the type D durometer.

Sclerometers SP0010 / SP0015

Pocket devices for testing the hardness and scratch resistance of flat or curved surfaces (coatings, varnishes, plastics, etc.) carried out using a tungsten carbide tip Ø 1 mm on which is exerted a adjustable pressure.

Reference: TABER 5770

Linear Abraser Taber 5770

Floating head abrasimeter designed to quantify abrasion or scratch resistance (optional kit) of flat or 3D parts of all shapes and sizes.

Abrasive tips

The standard Wearaser support Ref. 130852 accepts Wearaser Ø ¼ ”abrasive tips (Ø 6.35 mm). Other abrasive tips available: - Wearaser Jumbo Ø ½ ”tips (Ø 12.7 mm, Wearaser Jumbo holder required) - Weardisc Ø ¾ ”discs (Ø 19 mm, universal support required)

Friction

The standard Wearaser support Ref. 130852 accepts Wearaser Ø ¼ ”abrasive tips (Ø 6.35 mm). Other abrasive tips available: - Wearaser Jumbo Ø ½ ”tips (Ø 12.7 mm, Wearaser Jumbo holder required) - Weardisc Ø ¾ ”discs (Ø 19 mm, universal support required)

Buchholz SP1900 indentation device

Tests the surface hardness of paint films by measuring the indentation length of a sharp bevel wheel affixed to the surface.

Taber Rigidimeters 150/112/108

Precisely measure the rigidity, flexural strength, resilience and elasticity of paper, cardboard, plastics, metal foils, textiles, rubbers, threads, tubes, felts, etc.

Multi-Finger Scratch Tester Taber 710

Initially developed to meet automotive specifications, this device is ideal for evaluating plastics, paints, floor coverings, etc. Five independent tungsten carbide tools mounted on more or less loaded sliding axes exert a vertical load on the sample to be tested, positioned on a table moving by pneumatic system.

Other Scratch Test Devices Taber

Certain models of abrasimeter can be equipped with scratching tools thus making it possible to carry out scratch tests on flat or 3D samples.