AMETEK BROOKFIELD
ASCOTT ANALYTICAL EQUIPMENT LTD
ATP ENGINEERING BV
BINDER GmbH
BUCKLEYS (UVRAL) LTD
COATMASTER
DAKOTA ULTRASONICS
DEFELSKO CORPORATION
FORMAT MESSTECHNIK GmbH
HACH LANGE
HANGON
HANNA INSTRUMENTS FRANCE
HILDEBRAND
KERN & SOHN GmbH
LABOMAT ESSOR
LAUDA
LENETA COMPANY
MITUTOYO FRANCE
Q-LAB CORPORATION
RHOPOINT INSTRUMENTS
RK PRINT COAT INSTRUMENTS Ltd
SIGMUND LINDNER GmbH
TABER INDUSTRIES
TAYLOR HOBSON LIMITED
TESTO
TQC BV
VEOLIA WATER STI
VERIVIDE
WALLACE
X-RITE EUROPE GMBH
The PGX + measures contact angle (dynamic and static), surface tension and surface energy.
The PGX + measures contact angle (dynamic and static), surface tension and surface energy.
The device deposits a drop of water of a few µl on the surface depending on what has been requested and then analyzes the shape of the drop at a rate of 80 images per second. For most tests, deionized water is used, however the use of other liquids is also possible.
Characteristics :
Complies with international standards:
Portable instrument
The PGX + is portable and therefore easy to use even in the field. The small instrument is connected to a PC or laptop and is powered by USB.
Static and dynamic contact angle
Almost every 1 hundred seconds (80 frames per second), an image is taken and the device measures the change in contact angle. This thus makes it possible to determine the static or dynamic contact angle.
Surface tension
The shape of the hanging droplet is recorded by the camera. The shape of the droplet gives information about the intermolecular forces.
Surface energy
Surface "free" energy (SFE) is the force available on a solid surface to attract liquid molecules.
Optional : a metering pump to use high viscosity products
Demonstration video:
Reference: LAB PRO 2
The Lab Pro2 is a precision pinhole detector that is mains powered. This can be used in industries such as hipot testing for the inspection and testing of electrical insulation and for verifying that shielded items within an assembly are sufficiently protected. Available in 3 models: Ref. 6002-0110, Lab Pro2 porosity detector, 0.5 kV to 6 kV, with roller...
Reference: TESTEX
Testex Press-O-Film tape reproduces the profile of a surface by molding. The impression made on the tape is then measured with a thickness comparator (measurement of the maximum peak-valley height) or with the PosiTector RTR device (automatic linearization).
These spark testers allow fast and efficient testing of coatings up to 30mm thick as well as butt and overlap welded joints on plastic films, etc.
Portable porosimeters designed to control the defects or porosity of insulating coatings such as paint, PVC, rubber, enamel on conductive supports (tanks, reservoirs, valves, pipes, concrete, etc.).
Adjustable 360 °, these chromed steel mirrors are perfect for coating inspection on large structures and offer an excellent view of hard-to-reach areas thanks to their telescopic handle.
Voltmeter offering a fast and accurate method of checking the calibration status of high voltage porosimeters models PHD / DP / PHD Pro 'and equivalent devices.
Reference: SP0050
Imperfections or problems observed during coating inspections need to be clearly identified. A simple photo of the label makes it possible to identify the defect thanks to the comments area and its dimensions.
Reference: Kits d'inspection PosiTector
12 pre-configured kits for measurements of coating thickness on a metal support, profile depth and ambient conditions (temperature and humidity).
Reference: TM0081
Composed of a dry and a wet thermometer, Bacharach's sling-type psychrometer makes it possible to determine the percentage of relative humidity in the air.
Reference: TM0040
Handy tool for determining dew point temperature based on slingshot psychrometer measurements.
Reference: POOL PRO 2
The Pool Pro2 offers a non-invasive, reliable and speedy way to ensure that the PVC liner has been installed correctly and offers a truly water-proofed lining to the swimming pool. The Pool Pro2 can accurately detect and locate the smallest of defects and flaws, including faults too small to see with the naked eye. It offers true piece of mind when...
Dust present on stripped surfaces can reduce the adhesion of the coating, causing premature wear and non-conformities by against application specifications. The dust analysis kit is used to assess the quantity and size of dust particles on surfaces prepared for painting.
Assesses the quantity and size of dust particles on blast cleaned surfaces in accordance with ISO 8502-3.
TR110 / Surtronic Duo piezoelectric sensor roughness gauges
The PGX + measures contact angle (dynamic and static), surface tension and surface energy.
