Rugosimètres à patin SJ-220 /-310

Reference: DC9000

DC9000 boat hull roughness gauge

Controlling the roughness of a boat's hull plays an important economic and ecological role. Composed of a control unit with neck strap as well as a sensor equipped with 3 non-slip wheels and a carbide stylus, the device is moved horizontally on the surface of the vessel and collects a series of measurements.

dust analysis kit SP3200

Dust present on stripped surfaces can reduce the adhesion of the coating, causing premature wear and non-conformities by against application specifications. The dust analysis kit is used to assess the quantity and size of dust particles on surfaces prepared for painting.

Portable USB microscope LD6182

Portable microscope with 20x to 200x magnification factor equipped with digital camera, precision optics, adjustable 8 LED illumination and USB interface, making the smallest surface imperfections visible.

Illuminating magnifier SP9700

Robust and comfortable illuminating magnifier ideal for inspecting surfaces.

Reference: LAB PRO 2

Pinhole detector Lab Pro2

The Lab Pro2 is a precision pinhole detector that is mains powered. This can be used in industries such as hipot testing for the inspection and testing of electrical insulation and for verifying that shielded items within an assembly are sufficiently protected. Available in 3 models: Ref. 6002-0110, Lab Pro2 porosity detector, 0.5 kV to 6 kV, with roller...

Reference: RTR-3D

Testex Press-O-Film PosiTector RTR-3D tape reader

Allows measurement and recording of the profile parameters of a surface using Testex Press-O-Film tape.

SP3500 Surface Alkalinity Measuring Fluid

This liquid is used to determine whether a concrete surface is alkaline or acidic, an essential parameter before painting or repairing it.

Reference: LPD

Positest LPD low voltage porosimeter

Wet sponge porosimeter that detects defects, porosities and other discontinuities in coatings.

Reference: kits P7315 -7316

Measurement kits before painting SP7315 -7316

Kits made up of a selection of inspection tools and measuring instruments to check the correct preparation of steel surfaces before painting.

PST-100 / ST-AC Pro spark testers'

These spark testers allow fast and efficient testing of coatings up to 30mm thick as well as butt and overlap welded joints on plastic films, etc.

Reference: Kits d'inspection PosiTector

PosiTector inspection kits

12 pre-configured kits for measurements of coating thickness on a metal support, profile depth and ambient conditions (temperature and humidity).

PGX + Portable Surface Tension Goniometer

The PGX + measures contact angle (dynamic and static), surface tension and surface energy.

Reference: Livrets d'évaluation visuelle

Visual assessment booklets

Visual assessment booklets

Reference: Rugotest

Rugotest - Viso-tactile roughness comparators

Viso-tactile control of the roughness of steel substrates prepared by shot blasting.

Reference: POOL PRO 2

Electronic testing of swimming pool linings Pool Pro2

The Pool Pro2 offers a non-invasive, reliable and speedy way to ensure that the PVC liner has been installed correctly and offers a truly water-proofed lining to the swimming pool. The Pool Pro2 can accurately detect and locate the smallest of defects and flaws, including faults too small to see with the naked eye. It offers true piece of mind when...