Reference: DC9000

DC9000 boat hull roughness gauge

Controlling the roughness of a boat's hull plays an important economic and ecological role. Composed of a control unit with neck strap as well as a sensor equipped with 3 non-slip wheels and a carbide stylus, the device is moved horizontally on the surface of the vessel and collects a series of measurements.

Reference: TESTEX

Testex Press-O-Film Tape

Testex Press-O-Film tape reproduces the profile of a surface by molding. The impression made on the tape is then measured with a thickness comparator (measurement of the maximum peak-valley height) or with the PosiTector RTR device (automatic linearization).

Reference: Logiciels TQC SHEEN

Software for TQC SHEEN devices

Download the software for your TQC SHEEN brand devices here

Weld inspection kits

Weld inspection kits

Dust tape test PosiTest DT

Assesses the quantity and size of dust particles on blast cleaned surfaces in accordance with ISO 8502-3.

PST-100 / ST-AC Pro spark testers'

These spark testers allow fast and efficient testing of coatings up to 30mm thick as well as butt and overlap welded joints on plastic films, etc.

Rugosimètres à patin SJ-220 /-310

Reference: RTM

Micromètre analogique ou numérique pour rubans Testex

LD0500 concrete hammer

Device designed to control the quality of concrete and other building materials and its compressive strength. The automatic hammer recoil force displayed on the scale indicates the strength of the concrete.

Reference: POOL PRO 2

Electronic testing of swimming pool linings Pool Pro2

The Pool Pro2 offers a non-invasive, reliable and speedy way to ensure that the PVC liner has been installed correctly and offers a truly water-proofed lining to the swimming pool. The Pool Pro2 can accurately detect and locate the smallest of defects and flaws, including faults too small to see with the naked eye. It offers true piece of mind when...

Reference: RTR-3D

Testex Press-O-Film PosiTector RTR-3D tape reader

Allows measurement and recording of the profile parameters of a surface using Testex Press-O-Film tape.

Automatic tensiometer TD5

Surface tension, interfacial tension, drop-adhesion force and density measurements - the TD5 masters all this, in a very compact and lab space sensitive way.Complies with ASTM D971, ASTM D1331, EN 14210, EN 14370, ISO 6889, ISO 304, ISO 1409, OECD 115 etc.

Control voltmeter Pro'

Voltmeter offering a fast and accurate method of checking the calibration status of high voltage porosimeters models PHD / DP / PHD Pro 'and equivalent devices.

Reference: SP5000 /-5005

SP5000 / -5005 Post Paint Inspection Kits

Kits consisting of a selection of inspection tools and measuring instruments to assess the quality of old or new paint coats and perform measurements during application and before delivery of paint jobs.

dust analysis kit SP3200

Dust present on stripped surfaces can reduce the adhesion of the coating, causing premature wear and non-conformities by against application specifications. The dust analysis kit is used to assess the quantity and size of dust particles on surfaces prepared for painting.

Reference: kits P7315 -7316

Measurement kits before painting SP7315 -7316

Kits made up of a selection of inspection tools and measuring instruments to check the correct preparation of steel surfaces before painting.