PGX + Portable Surface Tension Goniometer

The PGX + measures contact angle (dynamic and static), surface tension and surface energy.

Reference: Rugotest

Rugotest - Viso-tactile roughness comparators

Viso-tactile control of the roughness of steel substrates prepared by shot blasting.

Reference: Kits d'inspection PosiTector

PosiTector inspection kits

12 pre-configured kits for measurements of coating thickness on a metal support, profile depth and ambient conditions (temperature and humidity).

Reference: Microscopes éclairants

Illuminating microscopes

Illuminating microscopes

Reference: PosiTest AIR

PosiTest AIR Leak Leak Detector

The PosiTest AIR Leak allows a simple, fast and precise detection of water or air leaks in rigid constructions or assemblies, joints, welds ... The leak detection liquid is applied to the surface to be checked before coming to the plate. sealed measuring chamber to achieve controlled depressurization. The presence of an air leak is indicated by the...

Reference: SP7310

Soluble Salts Analysis Kit - Bresle SP7310 Method

Contamination of surfaces by salts such as chlorides leading to blistering of organic coatings, it is important to ensure the cleanliness of the support by measuring the conductivity, the latter being proportional to the concentration of soluble salts in the solution.

Karsten LI7500 tubes

Simple test to measure the degree of water penetration in building materials such as concrete, stone and plaster. A glass tube filled with water is bound to the sample by plastilin. Water pressure is then exerted on the surface. A graduated scale indicates the amount of water that enters the surface over time.

PosiTest HHD Verifier control voltmeter

Portable voltmeter for checking high voltage porosimeters from 500 to 35,000 Volts.• Accuracy: +/- 5%.

LI0055 Carbide Moisture Meter

This precision moisture meter enables the detection of relative humidity in concrete, cement, sand and other building materials. The water in the sample reacts with the calcium carbide, producing an increase in pressure in the cell proportional to the residual moisture content.

Reference: TM0040

Dew point calculator TM0040

Handy tool for determining dew point temperature based on slingshot psychrometer measurements.

Reference: LAB PRO 2

Pinhole detector Lab Pro2

The Lab Pro2 is a precision pinhole detector that is mains powered. This can be used in industries such as hipot testing for the inspection and testing of electrical insulation and for verifying that shielded items within an assembly are sufficiently protected. Available in 3 models: Ref. 6002-0110, Lab Pro2 porosity detector, 0.5 kV to 6 kV, with roller...

Reference: Livrets d'évaluation visuelle

Visual assessment booklets

Visual assessment booklets

Reference: kits P7315 -7316

Measurement kits before painting SP7315 -7316

Kits made up of a selection of inspection tools and measuring instruments to check the correct preparation of steel surfaces before painting.

Reference: TM0015

Magnetic thermometer TM0015

Indicates the surface temperature on the steel.

Reference: TM0081

Psychrometer TM0081

Composed of a dry and a wet thermometer, Bacharach's sling-type psychrometer makes it possible to determine the percentage of relative humidity in the air.

SP3500 Surface Alkalinity Measuring Fluid

This liquid is used to determine whether a concrete surface is alkaline or acidic, an essential parameter before painting or repairing it.