AMETEK BROOKFIELD
ASCOTT ANALYTICAL EQUIPMENT LTD
ATP ENGINEERING BV
BINDER GmbH
BUCKLEYS (UVRAL) LTD
COATMASTER
DAKOTA ULTRASONICS
DEFELSKO CORPORATION
FORMAT MESSTECHNIK GmbH
HACH LANGE
HANGON
HANNA INSTRUMENTS FRANCE
HILDEBRAND
KERN & SOHN GmbH
LABOMAT ESSOR
LAUDA
LENETA COMPANY
MITUTOYO FRANCE
Q-LAB CORPORATION
RHOPOINT INSTRUMENTS
RK PRINT COAT INSTRUMENTS Ltd
SIGMUND LINDNER GmbH
TABER INDUSTRIES
TAYLOR HOBSON LIMITED
TESTO
TQC BV
VEOLIA WATER STI
VERIVIDE
WALLACE
X-RITE EUROPE GMBH
Measures the concentration of soluble salts on metal surfaces.
- Larger 2.8" (7,1 cm) impact resistant color touchscreen with redesigned keypad for quick menu navigation with or without gloves.
- Innovative PosiPatch system, with reusable PosiPatch.
- In accordance with ISO 8502-6.9.
- Magnetic ring, no more adhesive residue to clean.
- Automatic air suppression by a waterproof and breathable membrane.
- Use of syringes with plastic tip, not cutting.
| PosiPatch Kit | PosiPatch Kit | PosiPatch Starter Kit | PosiPatch Starter Kit | |
| SSTKITP | SSTKITPF | SSTKITPATCHP | SSTKITPATCHPF | |
| Standard rigid magnetic ring for flat surfaces or with a diameter greater than 1 m | ● | ● | ||
|
Flexible magnetic ring for surfaces with an internal diameter greater than 12 cm |
● | ● | ||
| PosiTector SST probe delivered | ● | ● | ||
| PosiTector SST probe not supplied. For use with an existing conductivity meter |
● | ● |
The 4 kits are delivered with 5 PosiPatch, a magnetic ring and with syringes with blunt tips.
- Scalable device: transforms into a coating thickness gauge on all supports or walls, thermo-hygrometer, gauge
Profile depth or Testex tape reader depending on the type of probe connected to the box.
- PosiTector SST probe to be combined with the PosiTector Standard box (serial number> 780321) or the Advanced PosiTector box (serial number
> 730,000).
- Supplied with a calibration certificate connected to NIST.
- 2 years warranty.
- Optional: patches, syringes, rigid transport case.
Demonstration video:
Dust present on stripped surfaces can reduce the adhesion of the coating, causing premature wear and non-conformities by against application specifications. The dust analysis kit is used to assess the quantity and size of dust particles on surfaces prepared for painting.
Reference: SP7310
Contamination of surfaces by salts such as chlorides leading to blistering of organic coatings, it is important to ensure the cleanliness of the support by measuring the conductivity, the latter being proportional to the concentration of soluble salts in the solution.
Assesses the quantity and size of dust particles on blast cleaned surfaces in accordance with ISO 8502-3.
Reference: kits P7315 -7316
Kits made up of a selection of inspection tools and measuring instruments to check the correct preparation of steel surfaces before painting.
Measures the concentration of soluble salts on metal surfaces.
