Sponge calibration kit | Labomat

Sponge calibration kit

Kit d'étalonnage éponges

Sponge calibration kit according to ASTM D7869 to quantify the amount of spray during the test.

Contactez-nous

CONTACT

SOCIETE

Description

Sponge calibration kit according to ASTM D7869 to quantify the amount of spray during the test.

Many mask models according to ISO 105 B02 and AATCC TM16 can be offered.

Product Details
Kit d'étalonnage éponges
16 other products in the same category:

Reference: QUV Solar Eye

UV aging chamber: QUV Solar Eye model

Each year, the sun, temperature and humidity are responsible for millions of euros of damage. QUV aging chambers allow samples to be exposed alternately to cycles of UV light and condensation, at controlled temperature. In a few days or a few weeks, you get the results of a natural aging of several months or years. Will your products withstand natural...

Price

Reference: QUV SPRAY / QUV SPRAY REPUR

UV aging chambers: Models QUV Spray / QUV Spray Repur

Each year, the sun, temperature and humidity are responsible for millions of euros of damage. QUV aging chambers allow samples to be exposed alternately to cycles of UV light and condensation, at controlled temperature. In just a few weeks, you get the results of natural aging for months or years. Will your products withstand natural outdoor conditions?...

Price

Reference: Déminéralisateurs

Demineralisers

Simple and economical solution to produce high quality type 2 purified water (NO RELEASE / NO STORAGE) with a high flow rate. Simple and economical solution to produce high quality purified water for aging chambers, salt spray chambers, cyclic corrosion chambers, climatic chambers and others.

Price

Reference: Quv uvc

UVC aging chamber Model QUV / uvc

The QUV / uvc model UVC enclosure is an evolution of the most widely used UV aging enclosure in the world: the QUV enclosure. It allows your samples to be exposed to a UVC source (254 nm) in order to test the aging of your products (plastics, leathers, fabrics, textiles, paints and other coatings, etc.) when they are subjected to UVC exposure. in the...

Price

Q-SUN xenon arc aging chambers

The sun, heat and humidity cause very expensive damage every year. The phenomena of discoloration, yellowing, loss of appearance properties but also cracking, cracks, occur both indoors and outdoors. Q-Sun Xenon aging chambers, manufactured by QLab corporation, simulate degradation caused by the entire solar spectrum, temperature and humidity.

Price