Sag index applicator

The Sag Index Applicator is especially designed for sag resistance evaluation. The total film width of 90mm is equally divided into 10 gaps, incremented in depths of 25µm

Sclerometers SP0010 / SP0015

Pocket devices for testing the hardness and scratch resistance of flat or curved surfaces (coatings, varnishes, plastics, etc.) carried out using a tungsten carbide tip Ø 1 mm on which is exerted a adjustable pressure.

Reference: Logiciels TQC SHEEN

Software for TQC SHEEN devices

Download the software for your TQC SHEEN brand devices here

Reference: SoloGloss / PolyGloss

SoloGloss / PolyGloss gloss meters

Range of glossmeters allowing rapid and precise measurement of the gloss of flat surfaces in the laboratory or in production and exploiting the results on a PC.

Reference: SP7310

Soluble Salts Analysis Kit - Bresle SP7310 Method

Contamination of surfaces by salts such as chlorides leading to blistering of organic coatings, it is important to ensure the cleanliness of the support by measuring the conductivity, the latter being proportional to the concentration of soluble salts in the solution.

Reference: SP0050

SP0050 identification labels

Imperfections or problems observed during coating inspections need to be clearly identified. A simple photo of the label makes it possible to identify the defect thanks to the comments area and its dimensions.

Reference: SP1820 /-1830 /-1831

SP1820 / -1830 / -1831 bend testers

Determine the rate of elongation, elasticity, resistance to cracking and peeling of paints and varnishes on a metal support by winding around a cylindrical or conical mandrel.

Reference: SP1880 /-1890 /-1891 /-1895

SP1880 / -1890 / -1891 / -1895 impact testers

Determine the impact resistance and flexibility of coatings by studying the deformation caused by a falling steel mass on the coated specimen.

SP3500 Surface Alkalinity Measuring Fluid

This liquid is used to determine whether a concrete surface is alkaline or acidic, an essential parameter before painting or repairing it.

Reference: SP4400 / SP4500

SP4400 / SP4500 Slow Stamping Testers

Used to assess the elasticity, flexibility and adhesion of lacquers, paints and other coatings on metal surfaces by observing the effects caused by the slow stamping of a coated specimen.

Reference: SP5000 /-5005

SP5000 / -5005 Post Paint Inspection Kits

Kits consisting of a selection of inspection tools and measuring instruments to assess the quality of old or new paint coats and perform measurements during application and before delivery of paint jobs.

Spreading and dripping applicators

The spread and sag applicator is a special film applicator with dual function: one side with 10 openings from 75 to 300 microns to test the tendency to sag (due to gravity depending on film thickness), the other side with 5 pairs of notches of increasing depth made to create sets of two strips of film (the fusion of the strips can be assessed to define...