LD0500 concrete hammer

Device designed to control the quality of concrete and other building materials and its compressive strength. The automatic hammer recoil force displayed on the scale indicates the strength of the concrete.

Reference: Lampes

Lamps

Lamps

Reference: SP5000 /-5005

SP5000 / -5005 Post Paint Inspection Kits

Kits consisting of a selection of inspection tools and measuring instruments to assess the quality of old or new paint coats and perform measurements during application and before delivery of paint jobs.

Reference: TM0081

Psychrometer TM0081

Composed of a dry and a wet thermometer, Bacharach's sling-type psychrometer makes it possible to determine the percentage of relative humidity in the air.

Reference: RTR-H

Testex Press-O-Film PosiTector RTR-H tape reader

Allows measurement and recording of the profile parameters of a surface using Testex Press-O-Film tape.

Automatic tensiometer TD5

Surface tension, interfacial tension, drop-adhesion force and density measurements - the TD5 masters all this, in a very compact and lab space sensitive way.Complies with ASTM D971, ASTM D1331, EN 14210, EN 14370, ISO 6889, ISO 304, ISO 1409, OECD 115 etc.

Reference: RTR-3D

Testex Press-O-Film PosiTector RTR-3D tape reader

Allows measurement and recording of the profile parameters of a surface using Testex Press-O-Film tape.

LI0055 Carbide Moisture Meter

This precision moisture meter enables the detection of relative humidity in concrete, cement, sand and other building materials. The water in the sample reacts with the calcium carbide, producing an increase in pressure in the cell proportional to the residual moisture content.

High voltage porosimeters

Portable porosimeters designed to control the defects or porosity of insulating coatings such as paint, PVC, rubber, enamel on conductive supports (tanks, reservoirs, valves, pipes, concrete, etc.).

Reference: SP0050

SP0050 identification labels

Imperfections or problems observed during coating inspections need to be clearly identified. A simple photo of the label makes it possible to identify the defect thanks to the comments area and its dimensions.

Reference: DC9000

DC9000 boat hull roughness gauge

Controlling the roughness of a boat's hull plays an important economic and ecological role. Composed of a control unit with neck strap as well as a sensor equipped with 3 non-slip wheels and a carbide stylus, the device is moved horizontally on the surface of the vessel and collects a series of measurements.

dust analysis kit SP3200

Dust present on stripped surfaces can reduce the adhesion of the coating, causing premature wear and non-conformities by against application specifications. The dust analysis kit is used to assess the quantity and size of dust particles on surfaces prepared for painting.