Reference: Pfund cryptometer
Pfund cryptometer
Simple and fast method of characterizing the covering power of wet films.
ZGM 1120 PC-controlled gloss meters | Labomat
ZGM 1120 PC-controlled gloss meters
Controlled via the GlossTools software, these ultra compact glossmeters available in 1, 2 or 3 angle versions are used to measure parts of various and varied shapes.
Description
Controlled via the GlossTools software, these ultra compact glossmeters available in 1, 2 or 3 angle versions are used to measure parts of various and varied shapes.
- Measuring range: 0-2000 UB.
- No display, measurement data directly transmitted to PC with GlossTools software via USB interface.
- The GlossTools software makes it possible to display in real time and simultaneously the statistics (min, max, average, standard deviation) relating to the different geometries and the good / bad indication according to the set tolerances.
- Various measurement modes: single or multiple measurements, automated series of measurements, continuous measurements.
- Measuring surface: 20 ° 4.2 × 2 mm / 60 ° 4.7 × 2 mm / 85 ° 15 × 2 mm / 20 ° Tappi 10 × 11 mm / 45 ° DIN 12 × 8 mm / 75 ° DIN 31 × 7 mm / 75 ° Tappi 14 × 6 mm.
- According to DIN 67530, ISO 2813, ASTM D523, ASTM D2457, BS 3900, ASTM C 346 (45 ° models), ISO 8254-1 (models
- 75 °), Tappi T 480 (75 ° models).
- Supplied in case with standard, GlossTools software, USB cable and calibration certificate.
Templates:
- monoangle: 20 ° ZGM 1120.2, 60 ° ZGM 1120.6, 85 ° ZGM 1120.8, 20 ° Tappi ZGM 1120.2T, 45 ° DIN ZGM 1120.4D, 75 ° DIN ZGM 1120.7D or 75 ° Tappi ZGM 1120.7T.
- 2 angles: 20 ° / 60 ° ZGM 1120.26, 20 ° Tappi / 75 ° Tappi ZGM 1120.2T7T, 45 ° DIN / 75 ° DIN ZGM 1120.4D7D.
- 3 angles: 20 ° / 60 ° / 85 ° ZGM 1120.268.
Product Details
14 other products in the same category:
Software for RHOPOINT INSTRUMENTS glossmeters
Download the software for your RHOPOINT INSTRUMENTS glossmeters here
Reference: PosiTector GLS
Gloss meter PosiTector GLS
The PosiTector GLS gloss meters are gloss meters with separate probe which can be connected to the multifunctional PosiTector GLS bodies.
Reference: Logiciels TQC SHEEN
Software for TQC SHEEN devices
Download the software for your TQC SHEEN brand devices here
Reference: Analyseur de surface Optimap
Optimap surface analyzer
Optimap surface analyzer for: Map and measure surface quality Quantify defects such as orange peel, ripple, and DOI Results displayed in units compatible with industry (K, Ka, Kb, Kc, Kd, Ke)
Reference: SoloGloss / PolyGloss
SoloGloss / PolyGloss gloss meters
Range of glossmeters allowing rapid and precise measurement of the gloss of flat surfaces in the laboratory or in production and exploiting the results on a PC.
Reference: Novo-Gloss Flex
Novo-Gloss Flex 60 glossmeter with separate micro-probe
Designed specifically to measure the gloss of surfaces that cannot be measured with traditional glossmeters, the Novo-Gloss Flex 60 glossmeter has a micro-probe allowing gloss measurements at the universal 60 ° angle.
Reference: Hazemètre Novo-Haze TX
Hazemeter Novo-Haze TX
Measures total transmission and Haze.Measurement according to ASTM D1003 (Cie C).Suitable for plastic films and other transparent materials.
Reference: Brillancemètre de paillasse
Novo-Curve benchtop glossmeter
The Novo-Curve measures the gloss of curved surfaces or small parts with an angle of 60 °. Both for matt or very shiny finishes, even for metals.
Reference: Opacimètre Novo-Shade Duo+
Novo-Shade Duo+ opacity meter
45°/0° reflectometer for measuring the opacity of coatings, plastic films and sheets of paper, the intensity of a shade on a gray scale and the cleanliness of a support. Continuous measurement mode. Statistics and graphical analysis. Data transfer via Bluetooth or USB connection. According to ISO 2814, ISO 6504, BS 3900 ‐ D4, D7, ASTM E97, ASTM E1347,...
Reference: Novo-Gloss Trio
Novo-Gloss Trio glossmeter
The Novo-Gloss Trio glossmeter measures gloss at 3 angles 20/60/85 °
Reference: Novo-Gloss 60 degrés
Novo-Gloss 60 degrees glossmeter
The Novo-Gloss 60 degree glossmeter is suitable for measuring gloss in most applications, from matt to high gloss finishes. This high specification portable glossmeter is suitable for use in many environments, including laboratories and production areas, and is the ideal choice for general gloss measurements of a variety of substrates and industrial...
Reference: Novo-Gloss 45
Novo-Gloss 45 glossmeter
The Rhopoint Novo-Gloss 45º measures gloss using a 45 ° geometry often specified in the ceramics, metallurgy and film manufacturing industries. Measurement of the gloss of plastic films according to ASTM D2457 Measurement of the gloss of ceramics according to ASTM C346
Controlled via the GlossTools software, these ultra compact glossmeters available in 1, 2 or 3 angle versions are used to measure parts of various and varied shapes.